| R series 600 series 6000 series 6200 series 6300 series 6800 series 6900 series |
||||||
| R4 Open |
R4 Z 1 Shield |
R4 ZZ 2 Shields |
R4 RS 1 Contact Seal |
R4 2RS 2 Contact Seals | ||
| NPB | Bore | Outside Diameter | Width | |||||
| Part No. | Frac. | Inch | Frac. | Inch | Open | Seal/Shield | ||
| RFQ per item | Frac. | Inch | Frac. | Inch | ||||
| R2 | 3.175 | 1/4 | 9.525 | 3/8 | 3.967 | 1/6 | 3.976 | 1/6 |
| R3 | 4.762 | 3/16 | 12.700 | 1/2 | 3.967 | 1/6 | 4.978 | 1/5 |
| R4 | 6.350 | 1/4 | 15.875 | 5/8 | 4.978 | 1/5 | 4.978 | 1/5 |
| R6 | 9.525 | 3/8 | 22.225 | 7/8 | 5.558 | 2/9 | 7.142 | 2/7 |
| R8 | 12.700 | 1/2 | 28.575 | 11/8 | 6.350 | 1/4 | 7.938 | 1/3 |
| Material: GCr15, equals to Standard SAE 52100(USA). DIN100Cr6(Germany). BS535A99(UK) | ||||||||
| R series bearings are available in open, sealed and shielded configurations. Sealed and shielded bearings may be slightly wider as shown in the table. | ||||||||
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
Bookmark this page
