Drawn Cup Needle Roller Bearing HFL-KFR Series
Basic Info
Model No.: HFL-KFR Series
Product Description
Owing to the thin-walled external drawn cup and the lack of an internal ring, drawn cup Needle roller bearings with a closed end and open ends have a very low radial section height. They contain extremely high load carrying ability, are appropriate for high velocities and can be effortlessly fixed. If snap rings, shoulders, etc., are not used for axial location, the housing bore can be shaped effortlessly and in particular economical.
Drawn Cup Needle Roller Bearing HFL-KFR with a closed end open ends are components containing thin-walled drawn external rings and needle roller and lock in assemblies. Drawn cup need Roller bearings with open ends come with complete complement variants. Most of the bearings are single row designs.
Needle Roller Clutch HFL-KFR Series with closed ends and open ends are obtainable in open and closed variants.
Features
High Precision Needle Roller Clutch Assembly HFL-KFR Series have a high load carrying capacity in addition to their low cross-section and stiffness. They are especially suitable for bearing arrangements where radial space is limited because needle roller bearings only carry pure radial load and can not limit the axial displacement of shaft relative to the housing. It is important to ensure that inner ring axis and outer ring axis must be aligned during mounting the bearings.
Designation | Basic Size | ||
Fw mm | D mm | C mm | |
HFL0308-KF-R | 3 mm | 6.5 mm | 8 mm |
HFL0408-KF-R | 4 mm | 8 mm | 8 mm |
HFL0606-KF-R | 6 mm | 10 mm | 6 mm |
HFL0615-KF-R | 6 mm | 10 mm | 15 mm |
HFL0806-KF-R | 8 mm | 12 mm | 6 mm |
HFL0822-KF-R | 8 mm | 12 mm | 22 mm |
Product Categories : Needle Roller Bearings > Drawn Cup Needle Roller Bearings