High Quality Obliquity Sheer Machine For Sale, Obliquity Sheer Machine, Obliquity Sheer Machine High Quality Suppliers in China

Home > Products > cylindrical bearings > Simple slitting and cutting Line

Simple slitting and cutting Line

  • Simple slitting and cutting Line
  • Simple slitting and cutting Line
  • Simple slitting and cutting Line
  • Simple slitting and cutting Line

Simple slitting and cutting Line

    Unit Price: 30000 USD
    Min. Order: 1 Set/Sets
    Transportation: Ocean
    Supply Ability: 200set/year
    Port: Tianjin

Product Description

Simple slitting line

1、 Introduction

The obliquity sheer machine is specially for round steel coil, which is divided into several strips by disc blade, and then rolled into required strip by equipment. The mechanical equipment, shearing process, operating system and accessories are described below.

2、 Shear material description

1. Cold rolled sheet, galvanized sheet.

2. The thickness :0.5mm-2.0mm, max width: 630mm

3. The number of blade:2-10 pcs, and the available length of shear shaft is 750mm

4. OD of decoiler : 2000m

5. ID of decoiler 508mm

6. capacity of decoiler: 10Ton

3、 Performance and parameters

1. Shear form; tension shear

2. The center height of the unit is 1100 mm

3. The total power consumption capacity of the unit is about 110 kW

4. The unit speed is above 120m / min

5. The direction of feeding is determined by the demander

4. Operation procedure:

Feeding trolley - uncoiling, vertical roller centering guide device - shearing - fixed separation and hydraulic expansion device - blanking curling - blanking trolley - finished product warehouse.

5、 Equipment composition details

1 feeding trolley 1 set

2 hydraulic decoiler 1 set

3 pinch conveyor 1 set

4.Guide assembly of vertical roller 1 set of cutting machine 1 set

5. Cutting machine 1 set

6. Hydraulic expander 1 set

7. One hydraulic blanking coiler and movable separator 1 set

8. Blanking trolley 1 set

9. hydraulic control station 1 set

10. 1 set of electric control system 1 set

6. Description of main mechanical equipment

1. Feeding trolley and saddle

(1) Purpose: the saddle is used to store raw material coil; the winding car is used to send the steel coil to be cut longitudinally to the uncoiler.

(2) Structure description: the trolley is a welded joint of steel structure, which is composed of lifting saddle and transverse trolley. The saddle is formed by V-shaped seat fixed on the top of the frame. The lifting saddle is a four column guide rod type [Ø 110 × 800], and the oil cylinder lifting saddle. The oil cylinder is fixed on the frame, and the high pressure hose provides pressure oil for lifting. The trolley is a steel structure with four wheels. The trolley is driven by 400 type hydraulic motor and runs along two rails fixed on the foundation [the rail is provided by the demander].

The main body of the saddle is a welded steel structure, and the saddle is installed on the foundation to form a rolling seam.


2. Decoiler. Hydraulic expansion and contraction pneumatic clutch type

(air compressor supplied by the demander)

(1)Purpose: the decoiler supports and rotates the slitting plate.

(2) The main shaft is 203mm, and the uncoiler is mainly composed of drum and box. The disc brake is a new type.

The uncoiler reel is a fan-shaped structure. The uncoiler reel is supported on the box by two bearings. One end of the uncoiler reel is a retractable reel, and the other end is connected with a retractable hydraulic cylinder. The hydraulic oil enters the retractable hydraulic cylinder to push the piston rod to move, and drives the inclined slider to move back and forth, driving the fan-shaped plate matched with the retractable sliding sleeve to move radially to complete the diameter of the reel.

(3) The pinch feeder is used to reduce part of the labor force at the beginning.

It is driven to the main shaft by cycloid motor, and then driven by pneumatic clutch to drive the main shaft to break the coil.


4. vertical roller guide roller pressing device

(1) Purpose: the device is set before disc shear, and its main function is to make the steel strip be able to be correctly centring during cutting.

(2) Structural description: the frame of the device is a steel structure weldment, three vertical side guide rollers are set on the left and right sides, each installed on a movable roller frame, and the roller is pressed on the upper part of the strip to prevent the steel strip from drum rising. The handwheel respectively turns the screw rod to move the roller frame by the nut fixed on the movable roller frame, so that the two sets of vertical rollers move opposite or reverse. The single side adjustment device can adjust the opening degree. The opening adjustment is set on the operation side and is of two hand wheel type.


5. shearing

(1) Purpose: disc shear is one of the main machines of the equipment, and its main function is longitudinal shear strip.

(2) Structure description: disc shear is mainly composed of the body. Base. The transmission device and other parts are composed. The base is installed on the foundation, and the left and right frames are installed on the base, and the blades are installed. Spacer. The upper and lower cutter shafts of rubber sleeve are installed between two frames, and an AC motor transmits power to the upper and lower cutter shaft through the cylindrical gear reducer distribution box to complete the shearing. When replacing the blade and spacer, one side frame can be moved by turning the screw rod by hand wheel.


6. Fixed separation and expansion device

(1) Purpose: separate the strip steel and establish a certain back tension to make the strip steel neat after slitting. Orderly winding to the coiler.

(2) Structural features: the tension device is separated from the fixed tension device. Guide roll. The whole frame height of fixed separation and tension device is composed of fixed separation, tension device and steering roller. The fixed separation shaft is fixed on the frame through the bearing, and the separation discs on the separation shaft are separated by a spacer sleeve. The tension device is in the form of tension platform, which is controlled by hydraulic cylinder.

7. Separation of activities

(1) Purpose: it is used to separate the strip and wind it on the crankshaft orderly and orderly to facilitate curling.

(2) Structure description: it is mainly composed of support, arm, separation roller and other devices. The bracket is of welded structure, which is installed on the foundation and coiling case. The hydraulic cylinder of separation roll is fixed on the bracket. When the hydraulic cylinder acts, the pressure roll swing bracket rises and falls. The separating plates are equipped with spacer sleeve positioning to adapt to cutting different specifications of strips.

8. coiler

(1) Purpose: it is used to coil the finished steel strip.

(2) Structure description: the main shaft diameter Ø 203mm coiler is mainly composed of drum, gearbox, base, AC motor, etc. The coiler is an AC variable frequency speed regulating motor. Through the coupling, the gearbox drives the crankshaft to rotate. The crimping head is a fan-shaped plate [width of steel strip groove provided by the demander]. One end of the crimping head is a steel cylinder which can be expanded and shrunk, and the other end is connected with the expansion and contraction hydraulic cylinder to form the expansion and contraction structure. The hydraulic oil enters into the expansion and contraction hydraulic cylinder to push the piston rod to move, drive the expansion and contraction sleeve of the inclined plane to move axially, and drive the fan-shaped plate matching with the expansion and contraction sliding sleeve to move radially to complete the expansion and contraction of the drum diameter. A set of hydraulic arm to prevent the main shaft from bending under force during operation.

The coiler is equipped with a hydraulic pushing device to assist the unloading car.

9. Unloading trolley

(1) Purpose: the saddle is used to store the finished coil. The coil unloading trolley is used to unload and move the finished coil after coiling.

(2) Structure description: the trolley is a steel structure weldment, which is composed of lifting saddle and transverse trolley. The saddle is formed by V-shaped seat fixed on the top of the frame. The lifting saddle is a four column guide rod type, and the oil cylinder lifting saddle. The oil cylinder is fixed on the frame, and the pressure oil is supplied by the high pressure hose attached to the drag chain. The trolley is a steel structure with four wheels. The trolley is driven by the motor reducer and runs along two rails fixed on the foundation. The main body of the saddle is a welded steel structure, and the saddle is installed on the foundation to form a rolling seam.

(3) Technical performance:

Type: 400 type hydraulic motor drive walking, hydraulic cylinder lifting

Lifting cylinder: 1

Trolley drive: 400 hydraulic motor

Bearing capacity: ≤ 10t

10. Hydraulic system

(1) Valve block on hydraulic station . All components are made of high quality products.

(2) Motor power: n = five . 5KW

(3) System pressure: 12MPa working pressure: < 10MPa

(4) Voltage of electromagnetic pump valve: DC24V


11. electric control system

(1) The electrical control system is used to realize the steel coil strip splitting, and the unit speed can be adjusted. The total installed capacity of the system is about 157kw, and there are four motors in total.

(2) Motor equipment details

Feeding motor 5 . 5kW pendulum Disc shear AC motor 22KW 1 . 1KW × 2 sets

Frequency conversion and speed regulating motor of coiler 75KW

Hydraulic station motor 5 . 5KW

(3) One operating platform (90kw frequency converter is provided in the platform. 30kW, one set of all components, Zhengtai)

(4) Provide external wiring diagrams. Terminal diagram, electrical schematic diagram.


YingYee Machinery and Technology Service Co.,Ltd

  • 1
  • 2
  • 3
  • 4
  • 5
 YingYee Machinery and Technology Service Co.,Ltd. is specialized in metal process equipments. We focus on international market and abide by international business rules and regulations strictly. Our team is strong in design, research, sale and service in metal process equipment. Our reputation and reliability are solid, thanks to customer feedbacks and their returning for more business.

Experience:

YingYee has provided metal process machines to more than 30 countries, mainly in US and South America. Our machines and services enjoy excellent feedbacks from satisfied customers who come back to us to long-term collaborations. In fact, the rate of repurchase is more than 80%.

Warranty:

All the machines from YingYee are covered by one year warranty since dispatch, as well as durable maintaince and repair support.

Corporation:

It is our responsibility to serve our customers well and safety their business needs. We aim to create win-win situation for all of our customers and try our best to avoid and eliminate any potential issues. Inputs from our customers will be treated timely to their satisfactions. Our solid reputations and satisfied customers are demonstration of our excellent services. You can count our continued excellent services and supports.

Company Info

  • Company Name: YingYee Machinery and Technology Service Co.,Ltd
  • Representative: Jessica Tian
  • Product/Service: Cold Roll Forming Machine , Roof Tile Roll Forming Machine , C/Z Purlin Roll Forming Machine , Shearing Machine , Light Keel Roll Forming Machine , Thread Rolling Machine
  • Capital (Million US $): 5000000 RMB
  • Year Established: 2015
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 91% - 100%
  • Total Annual Purchase Volume (Million US $): US$2.5 Million - US$5 Million
  • No. of Production Lines: 8
  • No. of R&D Staff: 91 -100 People
  • No. of QC Staff: 91 -100 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: Bazhou city, Langfang city, Hebei province
  • Contact Person: Ms. Jessica Tian
  • Tel: 86-0311-85415145
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters